LELOX is a manufacturer, we are not set up to sell direct to end-users.
LELOX products are conveniently available through dealerships and truck shops throughout Australia. If you call or email us, we can tell you who your nearest supplier is.
LELOX offers a standard range of 13 different mudguard styles (with 33 models in total): from quarter mudguards through to triaxle mudguards in both aluminium and stainless steel. If you have are unable to find a mudguard to suit your needs from our range, do not despair – you can use our custom mudguard service.
For best results, we strongly recommend that mudguards be professionally fitted.
IMPORTANT: If you have any doubts whatsoever about your ability to mount mudguards on your truck or trailer – STOP!
NOTE: The instructions we provide are a guide only – they do not take into consideration issues or problems that you may be faced with. We accept no liability for any adverse results you may get using these instructions.
Click on this link to go to our detailed Step by Step Installation Guide.
LELOX makes the aluminum bracket and the aluminium boss of our chassis pipes in our own in-factory foundry. The marine grade aluminum alloy is heated to over 750 degrees Celsius then the molten metal is poured into moulds to make the brackets and chassis pipes.
Yes, LELOX has been successfully providing heavy-duty mudguard mounting accessories to the Australian big truck market for over 20 years. Our products have been proven time and again in one of the world’s toughest truck and trailer operating environments.
LELOX brackets and chassis pipes are preferred by many operators for their high performance and durability combined with low weight.
LELOX chassis pipes and brackets should, under typical operating environments, last the life of the truck or trailer they are fitted to.
LELOX released a new generation cast aluminium brackets in late 2007, raising the looks and performance bar to new levels. The new brackets are a significant improvement in style, strength and durability. Simultaneously we have priced them very competitively – being only a fraction more expensive than our old short aluminium brackets and significantly cheaper than our old 4 bolt long aluminium brackets while being much stronger than either old bracket.
The new bracket has been designed to supersede our old brackets while making a huge improvement in inventory control for our resellers – reducing over 20 bracket products down to 3!
LELOX manufactures chassis pipes that offer superior strength, weight and on-truck performance relative to competing products. It is not unusual for LELOX chassis pipes to outlast the truck or trailer they are fitted to.
Our experience, based on considerable real-life industry feedback from users, is that properly fitted Lelox chassis pipes experience significantly fewer, if any, warranty or performance problems under typical operating environments relative to other chassis pipes in Australia.
LELOX off-set chassis pipes are designed to give maximum strength and durability for the lightest weight possible. The tubes are not bent and welded. The cast aluminium boss at the end of the pipe is moulded from molten aluminium directly onto the pipe in our own in-house foundry.
The DuraGal tube is kept straight to retain maximum structural integrity – we use thinner walls on our tubes compared to other suppliers without compromising on strength by bending or welding the tube. The aluminium boss is a heavy duty moulded ‘I’ beam designed to give maximum strength and holding power.
Off-set chassis pipes are designed to be mounted from an existing bolt hole on the truck chassis/frame. The off-set allows the pipe to achieve a full 360 degree rotation to be able to reach the mounting brackets bolted to the mudguards so that mudguards can be positioned on the truck wheels to achieve the best support, comply with regulations and look great at the same time.
The dimpled hardened washer supplied by LELOX is designed to sit between the chassis pipe cast aluminium base and the frame. This washer securely bites into the chassis pipe base as well as the truck frame for a more secure connection. A second hardened washer is cast into the inside of the off-set chassis pipe to provide a secure seat for the bolt used to mount the pipe onto the truck/trailer.
LELOX straight chassis pipes are designed to give the highest strength and durability for the lightest weight possible. The cast aluminum boss at the end of the chassis pipe is moulded from molten aluminium directly onto the DuraGal tube in our own in-house foundry – the tube is not hydraulically pushed into the aluminium boss using a plastic sleeve/liner. The aluminium boss has three bolt holes to make sure that once mounted it will not move!